TECNO KF8 SPARK 7 Pro DA file | FRP reset file free

Download TECNO KF8 SPARK 7 Pro FRP reset file | da file

You can easily Download TECNO KF8 SPARK 7 Pro DA file | FRP reset file for free and without password from here TECNO KF8 firmware flash file . It is exclusively available to all visitors to anonyshu.com.

File Name: TECNO KF8 SPARK 7 Pro
File Size: 11MB
Type:.zip
Download:  TECNO KF8 SPARK 7 Pro FRP reset file | da file

Download: MCT MTK Bypass Tool (Mediatek Auth Bypass Tool)
SP Flash Tool: Download
LibUSB Driver: Download

How to reset FRP  TECNO KF8 SPARK 7   with SP Flash Tool

TECNO KF8 SPARK 7 Pro DA file |  FRP reset file free
  • Run SP Flash tool.exe
TECNO KF8 SPARK 7 Pro DA file |  FRP reset file freeTECNO KF8 SPARK 7 Pro
  • Click on Choose from Download-Agent file Tab and select the MTK_All_IN_ONE_DA.bin file from the Unlock folder.
  • Tap Open
TECNO KF8 SPARK 7 Pro FRP reset file | da file free
  • Click on Choose from Scatter-Loading File Tab and select the scatter.txt file from the Realme 3i FRP folder.
  • Tap Open
Download Infinix Hot 10i X659B FRP reset file | da file free
  • Click on Click on Choose from Authentication File Tab and select the AuthSV5.auth file from the folder.
  • Tap Open
  • Now Untick the Preloader Partition
Download Infinix Hot 10i X659B FRP reset file | da file free
  • Goto Format => Select Manual Format Flash
Download Infinix Hot 10i X659B FRP reset file | da file free
  • Copy and Paste the below Pattern unlock Address into the SP flash tool
TECNO KF8 SPARK 7 Pro DA file |  FRP reset file free
Userdata Address (frp reset) 
Begin Address [HEX] 0x1d18xxxx your address
Format Length [HEX] 0x200xxxxx your address
Download Infinix Hot 10i X659B FRP reset file | da file free
  • Run MCT MTK Bypass Tool to your computer
  • Now Power Off your Realme Narzo 20 phone.
  • Connect your device to computer via USB cable
MCT MTK Bypass Tool
MCT MTK Bypass Tool rev4
  • Now Open the SP Flash Tool
TECNO KF8 SPARK 7 Pro
  • Goto Options =>>> Option =>>> Connection
  • Select Connection Settings =>> UART
  • Change Boud rate to 921600
Download Infinix Hot 10i X659B FRP reset file | da file free
  • Open Device Manager => Check the COMPORT Number
  • Select the COMPORT number (In my case I have COM9)
  • Click START
  • The unlocking process will begin
  • It will take some time to finish
TECNO KF8 SPARK 7 Pro
  • Once finished, disconnect and Power On your TECNO KF8 SPARK 7 Pro
  • Setup all initial steps.
  • That’s it.