Mobicel R1 (MT6580) Firmware flash file fix [DEAD/LCD/HANG LOGO] TESTED&100%

Mobicel R1 (MT6580) Firmware flash file fix [DEAD/LCD/HANG LOGO] TESTED&100%
Mobicel Dandy

Download Stock Firmware for Mobicel R1:

From this post you get good Mobicel R1 (MT6580) Firmware flash file fix [DEAD/LCD/HANG LOGO] TESTED&100% work perfectly from the source with flash tool, USB driver and how to flash it. Official Stock Firmware Flash File Now available for the Mobicel R1 & You can download it from below. by using this firmware you can solve all software issues with in your Mobicel R1 Plus such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc

Mobicel R1 Run on Android 8.1 and it is powered by Mediatek MT6580 Processor. it is
a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS,
WIFI and Bluetooth & 3G.

Why We Need Stock Firmware?

to downgrade a Phone
to upgrade a Phone
Fix some serious issue in phone
Remove FRP, Pattern and Pin lock
fix bootloop and software issue on Phone
completely Re-Installation of Board Software
Pre-Requirement’s:
backup NVRAM using this Guide
first make a complete backup of your Personal data (if Possible)
charge the device at least 50% to prevent accidental shut down during the process




Firmware Information:

Device Name: Mobicel R1
Type: Full ROM
Size: up to 1.03GB
SoC: Mediatek MT6580
Os: Android 8.1
Password: —
Root access: Not
Gapps: Included
Firmware Version: MT6580_Mobicel_Mobicel_R1_Mobi_228

Read more Mobicel Rio SS Unlock Firmware flash file Network File (*PAC) forver lock fix

Firmware(stock ROM) INSTALLATION REQUIREMENTS

PC/Laptop
USB data cable
Download the SP flash tool from here to flash this device
Download MTK USB VCOM driver from here
Download firmware from the link below

Download Link of Mobicel R1 Firmware

File Name:  MT6580_Mobicel_Mobicel_R1_Mobi_228
File size: 1.03GB
Flash Tool: MTK Flash Tool USB drIver

HOW TO INSTALL / FLASH STOCK FIRMWARE ON Mobicel r1

HOW TO INSTALL / FLASH STOCK FIRMWARE ON Mobicel r1
HOW TO INSTALL / FLASH STOCK FIRMWARE ON Mobicel r1
  • Download the flash file below and Extract(unzip) with WinRar or 7-Zip
  • Download the SP flash tool and MTK USB VCOM driver below and Extract(unzip)
  • Install MTK USB VCOM driver to your Pc/Laptop
  • open SP flash tool folder and Double click flash_tool.exe
  • Now click on choose folder icon button then Select and add scatter.txt inside the firmware(flash file) folder
  • After add firmware on the SP flash tool then click on the start button wait for the checksum process to finish
  • Power Off Phone and connect the phone to pc by hold volume up or volume down
  • Wait for the flashing process to complete
  • it will show you green which means you Successful Flashing
  • Turn on your phone and enjoy

Advantage of this official Firmware / Stock ROM (flash file)

it fixed baseband unknown
it’s reset, unlock and remove Pin, password, pattern, and privacy lock
it fixed dead boot
It fixed hanging on the logo
This Firmware(stock ROM) powered by ANONYSHU company Mobile

Chat now
1
Do You Need immediate Support?
Powered by Anonyshu
Hello! Can we help you?
Habari! Je, Tunaweza kukusaidi?