samsung note 10s clone / copy firmware mt6570 flash file | samsung-note 10s clone Stock Firmware Rom

SM-G973N

samsung note 10s clone / copy firmware

This post contains the samsung note 10s clone / copy firmware mt6570 flash file that will allow you to restore your samsung note 10s clone Smartphone to its original state.  You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.

Then this samsung note 10s clone Stock Firmware will fix your bricked phone; We will guide on how to flash the right official samsung note 10s clone Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the samsung note 10s clone Flash File below. Download the right stock ROM file to fix your device.

samsung note 10s clone Stock Firmware Information

Table of Contents

Rom Name samsung note 10s clone Stock Firmware Rom
Based On Stock OS
Rom OS Version Android
Rom Type Odexed
Socs Mediatek MT6570
Software needed Sp Flash Tool.
Compress Zip format

Things You Need

  • Charge your device: Before you proceed with the below information, you are recommended to ensure that your samsung note 10s clone is at least 50% charged.
  • PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing you need to do is make a backup.
  • Smart Phone Flash Tool Download
  • Install the Latest Driver:  samsung note 10s USB Drivers
  • Download: Download the above-required files on your PC.

Download link

File Name:  SAMSUNG_NOTE_10s_MT6570_alps__Note_10S__6.0__MRA58K_tested
File size: 776GB
Flash Tool: MTK Flash Tool USB drIver

How To Flash Ulefone Power Armor 13 Stock Rom Firmware

samsung note 10s clone
  1. Download the Stock Firmware on your personal computer.
  2. Install the USB MTK Drivers (skip if you have it already installed).
  3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
  4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
  5. Select the Scatter File from the extracted Stock Firmware on your computer.
  6. Select the Download Only in the SP flash tool option
  7. Click the Download button to start the Formating process.
  8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
  9. Patiently wait for your device to be formatted.
  10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
  11. Unplug your device and boot it up.
  12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
  13. Voila, you are all good.

samsung note 10s clone download

Chat now
1
Do You Need immediate Support?
Powered by Anonyshu
Hello! Can we help you?
Habari! Je, Tunaweza kukusaidi?