Marlax MX110 Firmware Flash File, Marlax MX110 Firmware Flash File, Marlax MX110 Flash File Firmware All Dead Fix, Marlax Mx110 Flash File All Version Stock Rom Firmware, Marlax MX110 Flash File Dead Hang Logo Lcd Fix -100% test
Marlax MX110 Firmware Flash File
Hi! We make this firmware available on this store to solve problems with your device, before buying know that this firmware is for:
-
- Remove Problems from Logo Fix ( Marlax Mx110 Pro );
- Remove Privacy Protection Code;
- Solve Device Software Problems;
- Update the Device to the latest version;
- Reset Device to Factory Origins;
- Remove Google Account;
- Solve slow cell processing issues;
- Remove password, Pin, Password, or Default;
Important information
- Always check if the IMEI remained the same after the flash process by typing *#06# ;
- Use Sp Flash Tool, Cm2, Nck Mtk for Flash Process;
- Use WinRAR or 7Zip to unzip the file available Here;
- Available on Google Drive ;
- File Size: 650MB ;
- Status: Tested and Approved;
- For files marked as Not Tested / Approved, back up if you can;
- Ignore if there is a website link inside the Archive to be able to visit;
- If you don’t know how to use the file, get help here.
- Use the Sp flash Tool that comes inside the Marlax Mx110 Pro Rom file with which it was used to test the software.
how to lash Marlax MX110 Firmware
These are possible instructions and should be followed by someone who can correct any errors that occurred during the flash process. We are not responsible for damage to your device.
NOTE: Your device must have at least 40-50% battery power to perform the flash process.
- Download and install D river Mediatek on your computer. If the driver is already installed, skip this step;
- Download the Stock ROM/Firmware you purchased from this store;
- Extract Sp Flash Tool onto your computer. After extracting, you can see many files;
- Just run flash_tool.exe from the file you extracted;
- Once flash_tool.exe starts, click on the Scatter-loading folder and add the file (stock ROM that comes in format ( Scatter file );
- After successfully adding the file to the tool, click the download button ;
- Make sure your device is completely turned off and connect your USB cable;
- Wait while the Flash process takes place on your computer;
- Once the flash is complete, you can see a green approval checkmark in flash_tool.exe;
- Unplug the cable and plug in the cell phone which is already fully updated.
- Any flash related error in Sp Flash Tool;
download link
