MTK META MODE UTILITY v50 – MTK Auth Bypass Tool V50 free Write Error 5 Fixed MTK Samsung Tool and Working 100%

MTK Auth Bypass Tool V50 (MTK META MODE UTILITY v50) Free For All Users Tested and Working 100%

MTK META MODE UTILITY v50 is a free mtk meta utility  Windows tool that allows you to effortlessly bypass DAA and SLA Auth (Secure Boot Protection) on any MediaTek MTK-based phone.

MTK Auth Bypass Tool v44 (MTK Meta Mode Utility) helps to detect any Oppo, Vivo, Tecno, Xiaomi Redmi, Infinix, MTK based smartphones into the SP flash tool, Miracle Box, UMT, MRT, MCT, CM2 Dongle for Flashing, Unlocking, and Repairing the phone. It comes with an auto-installer package and supports Windows 11, Windows 10, Windows 8, Windows 8.1, Windows 7, and Windows XP (32 & 64bit) architecture.

Changelog!!!

MTK META Utility V50 All MTK META Utility Free Download

Success is no accident. It is hard work, perseverance, learning, studying, sacrifice and
most of all, love of what you are doing or learning to do.

MTK META Utility V50 :

– Fix Samsung MTK force/exit BootROM without TP for :
Samsung Galaxy A32 4G (SM-A325M/SM-A325F) – with MT6768/69T – eMMC.
The issue caused by dm interface reset the following message appears and
prevent reboot for the second session – (● Rebooting device…
Write error 5:{Access is denied},(send,mtk_ubl\mtkcommio.cpp,304))
Now fixed.
– Odin reboot command fixed.
– Samsung Enable ADB via MTP got some improvements as well.
* Please don’t try to operate this function for these types below :
– Devices with KG (Locked/Active).
– Devices with ((sec ctrl status (0) – TFN (Tracfone))).
– Stay tuned for VIVO new security force brom and Demo disable for Dimensity 810,
we made an progress regarding this matter.
$ – This software is provided ‘as-is’, without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
– USE it at your own risk.

Archive’s Password = mtk_meta_utility

MTK META Utility V50 :

– Regarding Samsung MTK force BootROM without TP, now the device will boot to the system normally without flashing.
– No need to flash any file via ODIN after exit bootrom just rebuild PMT using the saved PIT file.
– Rebuild PMT is only needed for UFS chip-based devices, for eMMC devices exit brom option is enough.
– Tested with A32 5G (A326U – A326B > BIT3 to BIT7) & A12- A136U – A21 – A226B – A225M – A41 – F42.
– Now the software saves operations logs into the program directory for reports and Development support.
* Please don’t try this method with :
– KG Locked devices.
– Devices with Sec Ctrl Status 0.
– Tracfone devices.
This software is provided ‘as-is’, without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
– USE it at your own risk.

MTK Auth Bypass Tool V50

Added
Reboot MTK devices to Factory mode.
Reboot MTK devices to AT mode.
Fixed META API (MD) connection issues

Features mtk meta utility :

Read ADB info,
Read FastBoot Info,

Read META info,
Read NVRAM Meta,
Write NVRAM Meta,
Reset NVRAM Meta,
Decode NVRAM Lid (Meta),
Use SP API,
DUMP Emmc EXT CSD (META),
Soft Reset (misc) META eMMC,
Extract OFP MTK Oppo,
Reboot AT Mode,
Reboot MTK Factory mode,
Disable AUTH,
Read Preloader,
Crash PL,
Vivo Demo Remove,
Reboot Meta Mode.

Download link Mtk Auth Bypass Tool V48

download link

If you want to flash firmware or Remove the pattern, password from your Android phone then first you have to use the boot protection bypass tool to disable the secure Boot and detect the phone in SP or any other Unlock tool. So, Download MTK Secure Boot Disable Tool v11 with a proper installation guide to use the tool on your PC for free.

Nowadays, Every Android smartphone comes with USB protection to avoid third-party flashing and misuse of the device. You won’t be able to flash or unlock your phone without any authorized tool or permission. So, in this scenario, the MediaTek MTK Secure Boot Disable Tool can help you to bypass the auth security from your phone.

MTKSecBootDisable helps to detect any Oppo, Vivo, Tecno, Xiaomi Redmi, Infinix, MTK based smartphones into the SP flash tool, Miracle Box, UMT, MRT, MCT, CM2 Dongle for Flashing, Unlocking, and Repairing the phone. It comes with an auto-installer package and supports windows 10, Windows 8, Windows 8.1, Windows 7, Windows XP (32 & 64bit) architecture.

download more: Download MTK Bypass Tool Rev4 by MCT | MCT MTK Auth Bypass Rev4 2021

Features:

  • * MT6261
  • * MT6572
  • * MT6580
  • * MT6582
  • * MT6735
  • * MT6737
  • * MT6739
  • * MT6755
  • * MT6757
  • * MT6761
  • * MT6763
  • * MT6765
  • * MT6768
  • * MT6771
  • * MT6785
  • * MT6799
  • * MT6779
  • * MT6873
  • * MT8127
  • * MT8163
  • * MT8173
  • * MT8695

Changelog!!!

Success is no accident. It is hard work, perseverance, learning, studying, sacrifice and
most of all, love of what you are doing or learning to do. :

MTK META Utility V48 :
– Samsung MTK one click Force/Exit BootROM without TP.

– No Need to Rebuild PMT or choose PIT/Preloader file, all operations are automated now.
– Tested with all Samsung devices with MTK based chipsets.

– Preloader files are now decrypted – developers can use in their tools.
– Fixed reboot from MTP to Download Mode.
– Removed the warning message – since we have checked and confirmed that the method is
workable for all Samsung devices with MTK chipsets.
– Fixed (status_emi_setting_version_error).

– Fixed V45 bugs, please ignore the previous version and USE this one.
– Next TASK (KG Locked & VIVO New security & VIVO Demo Remove for
(MediaTek Dimensity 810) hopefully will succeed soon.
* Please don’t try this method with :

MTK META Utility V45 :

– Regarding Samsung MTK force BootROM without TP,
now no need to select a preloader file to exit brom,
the software will select the compatible preloader automatically.
– Renamed PIT files for PMT Rebuild operation with the
same Model Number and BIT Rev.

– Next task is get rid of Rebuild PMT, but needs more work – in process.
– Tested with (A326U – A325M – SM-A326W – A326B – SM-M325F
– A125F – A136U – A21 – A226B – A225M – A41 – F42) All bits.
* Please don’t try this method with :
– Devices with KG (Locked/Active).
– Devices with (sec ctrl status (0)).
– Tracfone locked devices.

MTK META Utility V48 :

– Improved Samsung force Brom from download mode operation without test point and added more devices.
– In this version we don’t replace all preloader data, we only removed the first char of EMMC_BOOT1/UFS_LU0 buffer and replaced it with FF.
– added a list of preloader files for most common Samsung MTK devices to exit brom all BITs.
– added a list of PIT files for most common Samsung MTK devices to exit the rebuild partition table all BITs.

– Now the original PIT will be saved with the device model number and version to be used later for Rebuild PMT I Download Mode after Exit BootROM.
– The correct steps to Force/Exit BootROM mode, are explained in the images below.
– After flash BL only via ODIN the device should boot normally to system if not booted and asked for VBMETA AVB verification for partitions except the preloader you need to flash full firmware (4 files with reparation option enabled).
– Fixed LG Preloader crash and port detection, the issue was caused due to two interfaces which are (USB MODEM & USB SERIAL),
– So now you can service LG devices which blocked bootrom via META Mode you can read/write NV partitions and (md1img, protect partitions, proinfo).
– Added more META mode information full list of build properties which common in android devices.
– GUI fixed and software internal functions optimized.
– We’re still working on a solution for one click exit brom mode and boot to system normally and also working for KG locked devices hopefully will be ready soon in near future stay tuned.
– We still recommend using this function only for (A326B/U/W and A125F, A41) since these are the only devices we had in our lab.
a lot of users have reported that all Samsung MTK devices are ok with this method, but we recommend testing only with the mentioned list.
* Please don’t try this method with :

– KG Locked devices.
– Devices with Sec Ctrl Status 0.
– Tracfone devices.
& The software is provided “as is”, without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement, USE it at your own risk.
Password = mtk_meta_utility
* Special thanks to Kamal Singla Gulzar Ahmed for the awesome PIT/Preloader collections and test reports.

MTK META Utility V48:

It’s time for the big achievements

* Added – Samsung Galaxy A32 5G (SM-A326B). Force-Reset to BootROM mode, using Download Mode exploitation.

Without test point or open phone back cover.
Tested with U3 REV August patch level (A326BXXU3AUH4 – OEM ON) and expected to work with all A32 5G REVISIONS.
* After disabling/fixing bootrom port, the device will immediately enter download mode and will not boot to the system at all, due to partition table corruption, you need to perform a full flash operation via ODIN (4 files) to get the device workable again.
* Removed the software date check, no need to change to an earlier date anymore.
* Samsung Firmware extractor is now fixed and works with (COMBO_BOOT) devices (Samsung UFS), the preloader can be dumped correctly for (eMMC – UFS – COMBO).
* Please don’t try this method with :
– KG Locked devices.
– Devices with Sec Ctrl Status 0.
– Tracfone devices.
& The software is provided “as is”, without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose, and noninfringement, USE it at your own risk.

supported operations:

– Disable brom security.
– Crash preloader (support samsung + lg).
– Dump preloader.
– Reset VIVO Demo test Mode.
– Reboot META MODE.
total supported chipsets:
* MT6781
* MT6768
* MT6883
* MT6885
* MT6889
* MT6833
* MT6853
* MT6853V
* MT6873
* MT6891Z
* MT6893
* MT8765WB
* MT8385
* MT8183
* MT8666
* MT6572
* MT6580
* MT6582
* MT6592
* MT6595
* MT6735
* MT6737
* MT6739
* MT6753
* MT6755
* MT6750
* MT6750M
* MT6750T
* MT6750S
* MT6757
* MT6761
* MT6762
* MT3369
* MT8766B
* MT6763
* MT6765
* MT6768
* MT6771
* MT6779
* MT6785
* MT6795
* MT6797
* MT8127
* MT8163
* MT8516
* MT8173
* MT8695
* MT6873
* MT6799
* MT8590

How To Use MTK META Utility V48?

  • Download & Unzip the MediaTek Secure Boot Disable Tool to your computer.
  • Run MTKSecDisable.exe
  • Install LibUSB Win32 driver to your computer (Skip this if already completed)
  • Now Power Off your phone
  • Press Volume Up And Power and Insert a USB cable
  • Click Disable Secure Boot
    MTK META MODE UTILITY v44
    MTK META MODE UTILITY v44
  • If the Disable Secure Boot process does not work, use the Force BROM function.
  • That’s it.
  • It will bypass the Auth Security from your phone.
  • Now you can use any unlock tool like SP Flash Tool, Miracle Box, UMT, CM2 to unlock your phone.

README:

Compatibility:The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32 bit and 64 bit).
Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.
Credits: MTK Auth Bypass Tool V48 is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.

Download MTK Auth Bypass Tool V41 link

Download MTK Auth Bypass Tool V43 link

old version: mtk meta utility v43 free Download mtk auth bypass tool

Download MTK Auth Bypass Tool V44 link

Download 54.4MB Mega

Download MTK META MODE UTILITY v45 link

Download 54 MB Mirror

Download MTK META MODE UTILITY v48 link

Download MTK META MODE UTILITY v49 link

Hello :
For those who used MTK META Utility and performed Samsung Force BootROM operation :

– How to Fix It If Your Samsung Phone Got Bricked due to
(KG Locked/Active/Normal &
Sec CTRL Status (0) & Tracfone) while trying to force brom :

– This type of patching uses WatchDog & power controller and special SoC BIT registers, so :

– Don’t expect any type of Usb fix.
– The only solution is only via ISP – Direct eMMC.
– The solution is to read (BOOT1 in eMMC flash case or LU0 in UFS case).
– Open by HXD editor.
– The first char of the file is (F) – 46.
– If your device uses eMMC memory change the (F) to (E) – for UFS change (F) to (C) and write the file back to the IC, the (E) refers to (EMMC_BOOT) and the (C) refers to (COMBO_BOOT).

– Another solution is to read (BOOT2 in eMMC Flash case or LU1 in UFS case) and write it back to the IC , the readed BOOT2 to BOOT1 and LU2 write to LU0.

– The LU2 and BOOT1 are secondary backup copies of the preloader so it can be used as primary boot region as well.

– BOOT1 is the primary boot region (BOOT-A) in eMMC flash & BOOT2 is the secondary boot region (BOOT-B) in eMMC flash and
LU0 is the primary boot region (BOOT-A) in UFS flash &
LU1 is the secondary boot region (BOOT-B) in UFS flash.

– In MediaTek for eMMC (BOOT1) area content match the (BOOT2) area content &
For UFS (Samsung case Combo Boot mode is used) so the primary and secondary regions (LU0 & LU1) doesn’t match – the (BOOT-A) start with (COMBO_BOOT) and (BOOT-B) starts with (UFS_BOOT) if you write (LU2 to L U0) you might face dm-verity corruption, but can be easy fixed by write firmware.

– We have strongly warned to not operate this method for this type of secured devices , but people ignored the warnings and tried it anyway, always remember considering take the developers advice because they knows what the software supposed to do.

Thanks.

By:: https://www.facebook.com/mofadal.96

Download MTK META MODE UTILITY v50 link

Download

Archive’s Password = mtk_meta_utility
also download: