free calculator DATALOCK CODE FOR HUAWEI ALGO V4 MODEMS – datalock code calculator

How to get datalock code calculator for Huawei Algo V4 modems
[sociallocker id=3487] Most of the time we need datalock code/OEM code for different purposes but we don’t get it from anywhere online. It always creates an awkward situation for us and we can’t perform the actions we want. The latest firmware for Huawei modems also asks for datalock code instead of firmware password because they are all based on the latest v4 algorithm authentication.

datalock code calculator

We have received a lot of requests regarding this issue, how to get database code for the latest algo v4 huawei modems. So we have prepared this short tutorial for you, how you can calculate database code for your modem. This article will show you how you can generate database code.

HOW TO GET DATALOCK CODE FOR HUAWEI ALGO V1, ALGO V2, ALGO V3 (201), MODEM
The unlock code / NCK for Huawei modem with Algo V1, Algo V2, Algo V3 (201) is used as database code, and no need to calculate database code separately for this modem. Unlock code works as datalock code for this modem while in the case of algo v4 we need to calculate datalock code/OEM code separately because of the latest v4 algorithm/authentication.

HOW TO GET DATALOCK CODE FOR HUAWEI ALGO V4 MODEM

To check the DATALOCK status of your device, use this command at.

In the database ^?

^ Datalock: 1
Yes

The default state value is “1” (enabled) and should either be computed or corrected by adopting any method given below, whichever you prefer:

There are two ways to get/generate the database code for Huawei modems:

Paid method:

1. Detect the device under DC unlocker software.

2. Get your own Datalock code / OEM code that is compatible with your device’s IMEI and NV history.

3. To get the Datalock code, your device must be in download mode, and to enter the device into download mode, you must update the global firmware to downgrade on your device, i.e. 21.110.xxx.xxx.xxx then

For this purpose, execute the following AT command in DC-unlocker or putty (these commands will only work with older firmware)

AT^NVRDEX = 50502,0,128

This command in dc-unlocker will respond as follows (the hexadecimal value of this command response will be different for each modem):

Send: AT^NVRDEX = 50502,0,128

Receipt: ^NVRDEX: 50502,0,128, D0 E8 87 99 99 2C C9 FC 8B 5F 90 B3 77 B5 3F 06 B0 63 AD 92 3E 03 86 65 DA 6D D0 57 76 A5 D1 C3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6B EB ED 64 48 C7 E7 71 E1 A0 20 D5 9C C2 3E 28 F5 2C E9 37 0C 23 01 82 72 C8 B7 B5 52 96 26 C0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
receive: ok

Then to restart the modem, type this at command and execute it, press enter on the keyboard

datalock code calculator

In ^ Reset

E8372-with-full-device-information but IMEI is missing Note: The original 8-digit Datalock Code is not free, you can buy Algo V4 Unlock Code from here by copying and pasting the result of the above command into the order form.

Freeway:

If you don’t want to buy a genuine DATALOCK code, no problem, then you can crack the NV register of your modem using any at command, whatever commands you want listed below (all commands should be used as is, otherwise you will do it. Be responsible):

All these commands will break the NVRAM register of your device’s DATALOCK token and the default state value will be changed to “0” (disabled).

1. This AT command will set the modem’s Datalock Code / OEM Code to a fixed value of 12345678 (8 digits)

Now copy/paste or type the following AT command and execute it, press Enter from your keyboard:

AT^NVWREX = 50502,0,128,4A FB 2D 5A 34 74 86 F0 A6 CC AE 46 99 53 83 1D 5C B1 7E 2A EF B2 B0 1A EF 53 03 8E C8 FF 1C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Then to restart the modem, type this at command and execute it, press enter on the keyboard

In ^ Reset

Now your device’s database code = 12345678

2. This AT command will set the modem’s Datalock Code / OEM Code to a fixed value of 00000000 (8 digits)

Now copy/paste or type the following AT command and execute it, press Enter from your keyboard:

AT^NVWREX = 50502,0,128,8F 29 FF 8E A8 CA 34 89 78 73 18 BA 9E F5 9C 64 0B A4 DB 81 DC 03 45 6E 72 DA EC 6A 0C 7C 90 65 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 12 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Then to restart the modem, type this at command and execute it, press enter on the keyboard

In ^ Reset

Now your device database code = 00000000

3. This AT command will set the modem’s Datalock Code / OEM Code to a fixed value of 99999999 (8 digits)

Now copy/paste or type the following AT command and exe

cute it press enter from the keyboard:

AT^NVWREX=50502,0,128,C3 39 93 98 47 F7 75 08 1E 65 EC 04 38 3A 45 A6 FA AF 46 4B 78 FF 53 FF 79 73 33 90 9D FF F1 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 B8 16 47 98 42 21 26 0E 86 1D A8 C8 E0 C2 0C FC 8F 2E A9 01 9D 58 05 3C 15 43 37 BC 95 66 E4 CF 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Then to restart the modem, type this at-command, and to execute it press enter from the keyboard

AT^RESET

datalock code calculator

Now your device datalock code = 99999999

To check the status of your device DATALOCK again use this at-command.

at^datalock?

^DATALOCK:0
OK

Now default status value is “0” (Disabled)

Now, you have learned the method of getting datalock code for your Huawei modem, you can use it for your desired purpose because this is the game changer code you’ve been waiting for. You can use it to update your modem with the latest algo firmware and also in AT-command as below:

AT^DATALOCK=”datalock code” (with quotes and to execute it press enter from keyboard)

Note: Replace 8-digit datalock code according to your IMEI or 12345678 or 00000000 or 99999999 whatever you choose.

Attention: Users who like this post can like our Facebook Page for the latest tips and tips.

[/sociallocker]