Download LURam v5.1 window tool Hello IOS 15/16 Bypass ICloud Hello Screen & Passcode & Broken Baseband IPhone iPad

LURam v5.1 Hello IOS 15/16 Bypass ICloud Hello Screen & Passcode & Broken Baseband iPhone iPad

LURam Hello IOS 15/16 Bypass ICloud Hello Screen & Passcode & Broken Baseband iPhone iPad
LURam, helloscreen, IOS16 Bypass, IPhone checkm8, boot, jailbreak, iPad, BrokenBaseband

? We welcome our newest Tool to our family:-
❤️ LURam Hello IOS 15/16 Bypass No signal Edition

:- Automatic Purple Mode Working in windows (No dcsd)
:- Automatic Change iPhone Serial number (No dcsd)
:- No need for any Files It’s server-side to side
:- Supported Devices In purple From iPhone 7 To x
:- Ipads or Older Versions U need Dcsd Cable and purple from mac

also, see: Download iPwnder v1.1 Free tool For Windows Coded By Gautam Great
Make sure you are Doing Powned Dfu From mac or Iso To have the best results

Don’t use windows tools For pownd Dfu will make some problems

iCloud Login working best
No battery drain
Not fix Working
There is no feeling of heat inside the device
Stable Work from the Best team ever

also see: new iPro IPWNDER (pwndfu) for Windows Tool free Download


The problem of some devices not being registered has been resolved

– The Purple Mode bot has been corrected, and for reference, it works on devices (7 TO X).

And other devices can work on DCSD or MAGICO cable

– Support has been made for the iPad and its skip has been added

-The button to change sn! has been opened for the freedom to change any cable you want.

-To change the sn manually, you can change this sn==> SN Is in support group visible only

Guide For LURAM v5.1- The Ultimate Windows RAMDISK tool


• Windows PC / Laptop

• USB Stick / Thumbdrive / Pendrive / Flash Drive (8GB + Recommended)


• 3uTools –

• Pwndfu ISO Image and LURam Latest Version –


How To Fix Drivers For Windows (DO NOT SKIP)

Remove the windows driver with the phone already connected

1. Go to device manager and remove it

2. Do not disconnect your device

3. Install the file in the Drives folder

Verify Drivers: After Successful Installation, verify that the files are in the paths below


Now disconnect and connect your phone

Open 3utools – Toolbox – Repair Drivers for Device

Now Check Drivers Installed are Good Or Bad from Device Manager on the PC

Good Installation – Apple Mobile Device USB Driver

Make Bootable USB for Pwndfu:

1. Download Pwndfu iso from the Above Links

2. Open 3uTools – Flash & Jailbreak Option

3. Select Make Checkra1n Jailbreak USB Flashdrive

4. Select Local Image – Pwndfu iso

5. Start Making Bootable USB

6. Bootable Flash Drive is Ready


1. Boot USB

2. Put Device in DFU Mode

3. Enter Pwndfu Mode

4. Restart PC to windows after Successful Pwndfu

Verify drivers like before again to avoid errors

5. Open LURam Ramdisk Tool

6. Click “Connect iDevice” and Wait for Success Notification.

7. Click “Boot Device” and Wait for Success Notification.

Note: Boot Device May take 1-3Minutes Depending Upon Your Internet Connection. Recommend to Use 15 MBPS Minimum. Boot May Fail in Low Internet.

8. Open Click Check SSH and Wait for Success Notification.

Note: If error – Open Device Manager and Verify Drivers again. Also, use the local driver for the drive.

9. For Backup:

Click “Backup Activation Files”

10. After Successful Backup, Restore Device to Latest iOS (No Data Restore/Quick Flash)

11. For Activation with Backup, Repeat Steps 1-8

12. Click “Activate iDevice”

Enjoy Windows Ramdisk by LURam Ramdisk.

Download Luram v5.1 link

Download Luram mega