Invens A11 Firmware Flash File factory signed (PAC file) 2021-2022

anonyshuAugust 25, 2023

65 2 minutes read

Invens A11 Firmware Flash File factory signed (PAC file) 2021-2022, Invens A11 Firmware, Invens A11 Flash File, Invens A11 PAC file

Invens A11 Firmware Flash File factory signed (PAC file) 2021-2022

Hi! We make this firmware available on this store to solve problems with your device, before buying know that this firmware is for:

Solve Software Problems;
Update the Device to the latest version;
Reset Device to Factory Origins;
Remove Google Account;
Solve slow cell processing issues;
Remove password, Pin, Password or Default;

Important informations

Always check if the IMEI remained the same after the flash process by typing *#06# ;
Use Spd Flash Tool, Cm2, Nck spd for Flash Process;
Use WinRAR or 7Zip to unzip the file available Here;
Available on Google Drive ;
File Size: 600MB ;
Android version: Pie;
Status: Tested and Approved ;
For files marked as Not Tested / Approved, back up if you can;
Ignore it within the file has any l ink to follow;

HOW TO INSTALL THIS Invens A11 FIRMWARE

These are possible instructions and should be followed with someone who can correct any errors that occurred during the flash process. We are not responsible for damage to your device.

NOTE: Your Android device must have at least 40-50% battery power to perform the flash process.

Download and install D rivers Spreadtrum on your computer. If drivers are already installed, skip this step;
Download the Stock Rom/Firmware (*Pac) you purchased from this store;
Extract the Spreadtrum Upgrade Tool onto your computer. After extracting, you can see many files;
Just run UpgradeDownload.exe from the file you extracted;
Once the Spreadtrum Upgrade Tool starts, click on the Load Packed button and add the file (stock rom which comes in (*pac) format.
After successfully adding the Pac file in the Spd Flash Tool , click the Start download button ;
Make sure your device is completely turned off, and press the bootkey keyboard (Usually it has been V+ or V- Button);
Plug in your Usb cable and wait while the process runs on your computer;
Once the flash is complete, you can see the green message approved on the Upgrade Spreadtrum ( Passed );
Once you see the green message pass, unplug it and plug in the phone which is already fully up-to-date.
Any flash related error in Spd Flash Tool :