-Advertisement-
Itel

itel PR652C firmware flash file PAC file

free download itel PR652C firmware flash file PAC file Download latest version itel PR652C PAC firmware flash file, itel PR652C flash file

itel PR652C firmware flash file

Hi! We make this firmware available in this store to solve problems with your device, before know that this firmware is for:

  • Remove Privacy Protection in itel PR652C;
  • Solve Device Software Problems;
  • Update the Device to the latest version;
  • Reset¬†the Device to Factory Origins;
  • Remove Google Account;
  • Solve slow cell processing issues;
  • Remove password, Pin, Password, or Default;

Important information

  • Always check if the¬†IMEI¬†remained the same after the flash process by typing¬†*#06#¬†;
  • Use Cm2, Nck Spd for Flash Process;
  • Use¬†WinRAR¬†or¬†7Zip¬†to unzip the file available¬†Here;
  • Available on¬†Google Drive¬†;
  • File Size:¬†600MB¬†;
  • Android Version:¬†8.1
  • Status:¬†Tested and Approved¬†;
  • For files marked as Not Tested / Approved, back up if you can;
  • Ignore if there is a¬†Site Link¬†inside the Archive¬†to be able to visit;
  • If you don’t know how to use the file, get help¬†here.

how to  flash itel PR652C firmware flash file

These are possible instructions and should be followed by someone who can correct any errors that occurred during the flash process. We are not responsible for damage to your device.
NOTE: Your device must have at least 40-50% battery power to perform the flash process. 
  1. Download and install D river Spreadtrum on your computer. If the driver is already installed, skip this step;
  2. Download the Stock ROM/Firmware (*Pac) you purchased from this store;
  3. Extract the Spreadtrum Upgrade Tool onto your computer. After extracting, you can see many files;
  4. Just run UpgradeDownload.exe from the file you extracted;
  5. Once the Spreadtrum Upgrade Tool starts, click on the Load Packed Button and add the file (stock ROM which comes in (*PAC) format.
  6. After successfully adding the PAC file in the SPD Flash Tool, click the Start download button ;
  7. Make sure your device is completely turned off, and press the boot key  keyboard (Usually it has been V+ or V- Button);
  8. Plugin your USB cable and wait while the process runs on your computer;
  9. Once the flash is complete, you can see the green message approved on the Upgrade Spreadtrum ( Passed );
  10. Once you see the green message pass, unplug it and plug in the phone which is already fully up-to-date.
  11. Any flash related error in Spd Flash Tool :

download itel PR652C pac firmware flash file

download link

also, download

{free download }itel a16 plus white lcd firmware flash file fix

{free download }Itel it9300 firmware flash file

lumitel l6206 unlocked firmware flash file

Back to top button
Open chat
1
Anonyshu
Do You need immediate Support?
Je naweza kukusadia?