itel W5006S FRP reset/bypass file

You can easily Download itel W5006S frp reset file pac file itel W5006S FRP bypass without any box Itel itel W5006S da file and without a password from here. It is exclusively available to all visitors to

itel W5006S FRP reset/bypass file

how to reset/bypass  FRP itel W5006S

These are possible instructions and should be followed with someone who can correct any errors that occurred during the flash process. We are not responsible for damage to your device.
NOTE: Your device must have at least 40-50% battery power to perform the flash process. 
  1. Download and install D river Spreadtrum on your computer. If the driver is already installed, skip this step;
  2. Download the Stock Rom/Firmware (*Pac) you purchased from this store;
  3. Extract the Spreadtrum Upgrade Tool onto your computer. After extracting, you can see many files;
  4. Just run UpgradeDownload.exe from the file you extracted;
  5. Once the Spreadtrum Upgrade Tool starts, click on the Load Packed Button and add the file (stock ROM which comes in (*PAC) format.
  6. After successfully adding the PAC file in the SPD Flash Tool , click the Start download button ;
  7. Make sure your device is completely turned off, and press the boot key  keyboard (Usually it has been V+ or V- Button);
  8. Plugin your USB cable and wait while the process runs on your computer;
  9. Once the flash is complete, you can see the green message approved on the Upgrade Spreadtrum ( Passed );
  10. Once you see the green message pass, unplug it and plug in the phone which is already fully up-to-date.
  11. Any flash related error in Spd Flash Tool :

download itel W5006S frp file

download link

also, download

Itel P36 Pro LTE L6501 FRP RESET PAC | DA File tested 100% and approved

{free download }ITEL A14 FRP RESET FILE ( PAC)

ITEL S16 W6502 FRP reset file | da file free