Ra1nUSB Intel & amd ios 12-14 windows Checkra1n jailbreak A Windows-based jailbreak method for iOS 13 and iOS 13.3 is called Ra1nUSB. ra1nusb intel latest version, ra1nusb intel ios 14 2022, ra1nusb ht intel dmg download
A Windows substitute for Checkra1n is Ra1nUSB. Only Macs are supported by Checkra1. Latest Ra1nUSB Checkra1n (mac) for Intel & amd GitHub windows to jailbreak patch ios 12-14 passcode/hello free download The utility cannot, however, be installed directly on Windows. To use Ra1nUSB to jailbreak, refer to the instructions below. For this technique, a USB drive is required.
However, it is well-known as iOS 13.7 Jailbreak, also known as Unc0ver, Hexxa Plus, or Checkra1.
The sole prerequisite for starting modra1n is an empty USB drive with at least 16 GB of space. Checkra1n USB that can be booted from. In contrast to the previous version, ra1nusb, Modra1n iOS 14 is the most recent version of Ra1nusb iOS 14.8, and it supports several checkra1n versions. Below are instructions on how to jailbreak your device as well as the commands needed for the upgrade.
Devices up to A10 can be jailbroken using the checkra1n tool. However, it only works with A11 devices if you use checkra1n’s jailbreak tool to bypass your device’s BPR verification.
The Checkra1n jailbreak is based on the bootrom vulnerability Checkm8, and the Blackbird exploit lets you jailbreak devices running iOS 12 to iOS 14.8 and the most recent iOS firmware, including the iPhone X and the iPhone 5s. In this case, iOS 13.4, iOS 13.4, iOS 13.7, and higher support checkra1n.
What’s New in Ra1nUSB Checkra1n Jailbreak intel and amd the Latest Version
Checkra1n’s most recent version is compatible with iOS 14.8 starting with iOS 12, and any iOS 14.8 can be supported by A10 devices and partially A11 devices when the BPR test for A11 was removed. There is no way to jailbreak Apple smartphones with A11 processors.
But don’t fear, the taurine and unc0ver jailbreaks have greatly improved, and they now support iOS 11 to iOS 14.3 on all devices! Here are the instructions for downloading the unc0ver jailbreak and the taurine jailbreak if you have the newest devices. Other kernel-related problems that prevented the device from booting have been fixed.
If you’d want, you could use the blackb0x jailbreak to jailbreak tvOS and then use Kodi on Apple TV.
Although the checkra1n jailbreak is presently only compatible with Mac devices, there are other ways to download the jailbreak for Windows devices. It is necessary for your Windows machine to dual-boot in order to use the tool case ra1nstorm. Here is a another approach that doesn’t even call for dual-booting.
Ra1nusb Checkra1n jailbreak supported devices iOS 12.x to 14.x
The jailbreak checkra1n now officially supports A9 A9X and A10 gadgets, and some support is available for devices running A11 by bypassing the BPR test.
- iPhone X (Partial Support Skipping the A11 BPR check)
- iPhone 8 and iPhone 8 Plus
- The iPhone 7 and iPhone 7 Plus
- iPhone 6s, 6s Plus, and SE
- iPad 5th generation
- The iPad Air 2
- iPad mini 4
- iPad Pro 1st generation
- Apple TV 4 and 4K
- iBridge T2
A bootable blank flash drive is necessary for the testra1n and ra1nusb iOS 14 approach or the modra1n iOS 14 way by only a tech. When you want to jailbreak an iPhone using Checkra1n Windows, you can launch Modra1nanytime using the bootstrapped Checkra1n USB. When necessary, it will boot the checkra1n USB into your Windows machine. The following will provide an explanation of each stage.
Download Ra1nUSB Checkra1n for windows intel and AMD
Name: Ra1nusb Final Version INTEL.zip
Size: 756 MB
Instructions for Ra1nUSB
Step 1: Using the aforementioned download buttons, first download the Ra1nUSB in accordance with your PC.
Step 2: Then, to generate your bootable USB, download and install balenaEtcher (Step 2). Open the program after connecting the USB device to the computer. When asked to “choose image” in the “select image” box, it will recognize your USB device and choose the downloaded Ra1nUSB file.
Step 3: After the procedure is finished, Reboot your machine to access the BIOS files. After that, turn off VT-D, EL SerialPort, SecureBoot, Stack Network, Fastboot, and Wake on LAN before leaving the BIOS page. Activate the virtualization option and save your modifications.
Step 4: Restart your computer by starting it from the USB. The Boot macOS Install from Ra1nUSB option should be used. The procedure then begins. Ra1nUSB offers Boot Verbose as an option. Watch for your PC to boot the image. Ra1nUSB starts up and displays the macOS installer screen (if an issue occurs, you must restart the BIOS and retry the operation).
Step 5: Tap Utilities > Terminal at the top. From the terminal window, enter ra1nusb and press Enter.
Step 06: – The jailbreak screen for Checkra1n should now appear. Next, link your gadget to your computer. Continue with the MAC OS installation guide for Checkra1.
versions for iOS
iOS 14.8, iOS 13.3, iOS 13.2.3, iOS 13.2.2, iOS 13.2, iOS 13.1.3, iOS 13.1.2, iOS 13.1.1, iOS 13.1, iOS 13, iOS 12.5.3, iOS 12.5.2, iOS 12.5.1, iOS 12.5, iOS 12.4.9, iOS 12.4.8, iOS 12.4.7, iOS 12.4.6, iOS 12.4.5, iOS 12.4.4, iOS 12.4.3, iOS 12.4.2, iOS 12.4.1, iOS 12.4, iOS 12.3.2, iOS 12.3.1, iOS 12.3
Note Note We don’t have any details regarding iOS 13.3.1 or iOS 13.7 version. We haven’t been able to test these versions using RainUSB. It may be compatible with these versions as well. It also has jailbreak options to iOS 14 up to iOS 14.8 and iOS 15 iOS 15.1 beta , too. Check out the pages below for more information.
iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus, iPhone SE, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X , iPad 2 , iPad Mini (1st gen), iPad (3rd gen), iPad (4th gen), iPad mini 4, iPad Pro (12.9 in.) 1st gen, iPad 2018 (6th gen), iPad 2019, (7th gen), iPad Pro 10.5” (2017) , iPad Pro 12.9” 2nd Gen (2017), iPod Touch (5th Gen)
ra1nusb Apple logo Stuck
This is the most common error. After doing all the Ra1nUSB setup & when booting it kept showing the apple logo without going anywhere.
- How to fix –
Go to your bios settings. Disable the EL SerialPort , SecureBoot, Stack Network, Fastboot
Wake on LAN. Enable virtualization, save and exit bios. Then go to options > graphics injector > untick graphics inject in ra1nusb boot menu. Now retry booting rainusb. (If this doesn’t work, use a different pc)Here is a video tutorial to fix this error by Just a Tech youtube channel. However, this language is different.
Still waiting for root device
Root device error is another common error for Ra1nUSB. If you are stuck on this error follow the below instructions.
- How to Fix –
You should go to options before booting. config and select ‘config-check’ as your config file. Afterwards boot from usb (UEFI) and voila.
You will get an ACPI error when not recognizing Nvidia graphics cards. With the following methods you can get Ra1nUSB working on most custom PCs.
- How to fix –
Go to the clover menu when bootup, then go to options. You can enter any of the following commands in the boot arguments section. Add -v in front of any of these for verbose boot.
UseKernelCache=No npci=0x20000 -f
ra1nusb error 20
Error -20 is another common error encountered during the Ra1nUSB process.
- How to fix –
Select the jailbreak button with safe mode. With this method, tweaks will not run. Go to Cydia, remove the bug fix and shut down the jailbreak tweak again to run.
ra1nusb black screen /Error 31/20 Mouse/Keyboard/Boot Failed
These are other errors. All these errors are fixed with AMD File. Check out this video tutorial by Apple Tag.