Samsung S18 Clone Firmware Flash File MT6571 7.0

Samsung S18 Clone Firmware Flash File MT6571 7.0, Samsung S18 Clone Firmware, Samsung S18 Clone Flash file

Hi! We make this firmware available on this store to solve problems with your device, before buying know that this firmware is for:

Remove Logo Fix Problems ( Samsung S18 Clone);
Remove Privacy Protection Code;
Solve Device Software Problems;
Update the Device to the latest version;
Reset Device to Factory Origins;
Remove Google Account;
Solve slow cell processing issues;
Remove password, Pin, Password or Default;

Important informations

Always check if the IMEI remained the same after the flash process by typing *#06# ;
Use Sp Flash Tool, Cm2, Nck Mtk for Flash Process;
Use WinRAR or 7Zip to unzip the file available Here;
Available on Google Drive ;
File Size: 300MB ;
Android version: 7.0
Status: Tested and Approved;
For files marked as Not Tested / Approved, back up if you can;
Ignore if there is a Site Link inside the Archive to be able to visit;

how to flash Samsung S18 Clone with our Firmware

These are possible instructions and should be followed with someone who can correct any errors that occurred during the flash process. We are not responsible for damage to your device.

NOTE: Your device must have at least 40-50% battery power to perform the flash process.

Download and install Driver Mediatek on your computer. If the driver is already installed, skip this step;
Download the Stock Rom/Firmware you purchased from this store;
Extract Sp Flash Tool onto your computer. After extracting, you can see many files;
Just run flash_tool.exe from the file you extracted;
Once flash_tool.exe starts, click on the Scatter loading folder and add the file (stock rom that comes in format ( Scatter file );
After successfully adding the file to the tool, click the download button ;
Make sure your device is completely turned off and connect your USB cable;
Wait while the Flash process takes place on your computer;
Once the flash is complete, you can see a green approval checkmark in flash_tool.exe;
Unplug the Cable and plug in the cell phone which is already fully updated.
Any flash related error in Sp Flash Tool;