{free download }Hurricane Icon firmware Flash File

Hurricane Icon firmware, Hurricane Icon flash file, Hurricane Icon Stock ROM (flash file), Hurricane Icon Stock Firmware (ROM Flash File) [DOWNLOAD],

Hurricane Icon Firmware Flash File

Hi! We make this firmware available on this store to solve problems with your device, before buying know that this firmware is for:

  • Solve Software Problems and Logo Fix;
  • Update the Device to the latest version;
  • Reset Device to Factory Origins;
  • Remove Google Account;
  • Solve slow cell processing issues;
  • Remove password, Pin, Password or Default;

Important informations

  • Always check if the IMEI remained the same after the flash process by typing *#06# ;
  • Use Spd Flash Tool, Cm2, Nck spd for Flash Process;
  • Use WinRAR or 7Zip to unzip the file available Here;
  • Available on Google Drive ;
  • File Size: 830MB ;
  • Android version: 7.0;
  • Status: Tested and Approved ;
  • For files marked as Not Tested / Approved, back up if you can;
  • Ignore it within the file has any l ink  to follow;
  • If you don’t know how to use the file, get help here.
  • Read Info: Icon_SC7731_20171108_7.0
  1. Use the Spd Flash Tool that comes inside the Firmware file you downloaded from the link you received in your email. 
  2. Before purchasing, read your device’s information to certify the software variant.

how to flash Hurricane Icon firmware Flash File !

Hurricane Icon firmware Flash File

These are possible instructions and should be followed by someone who can correct any errors that occurred during the flash process. We are not responsible for damage to your device.
NOTE: Your device must have at least 40-50% battery power to perform the flash process.
  1. Download and install Driver Spreadtrum on your computer. If the driver is already installed, skip this step;
  2. Download the Hurricane Icon Stock ROM/Firmware (*Pac) you purchased from this store;
  3. Extract the Spreadtrum Upgrade Tool onto your computer. After extracting, you can see many files;
  4. Just run UpgradeDownload.exe from the file you extracted;
  5. Once the Spreadtrum Upgrade Tool starts, click on the Load Packed Button and add the file (stock ROM which comes in (*PAC) format.
  6. After successfully adding the file (* Pac ) in the SPD Flash Tool, click the Start download button ;
  7. Make sure your device is completely turned off, and press the boot key keyboard (Usually it has been V+ or V- Button);
  8. Plugin your USB cable and wait while the process runs on your computer;
  9. Once the flash is complete, you can see the green message approved on the Upgrade Spreadtrum ( Passed );
  10. Once you see the green message pass, unplug it and plug in the phone which is already fully up-to-date.
  11. Any flash related error in Spd Flash Tool :

Hurricane Icon Firmware Flash File

Chat now
1
Do You Need immediate Support?
Powered by Anonyshu
Hello! Can we help you?
Habari! Je, Tunaweza kukusaidi?